How to camp out in an ice fishing truck tent

How to build your own ice fishing trailer, tent, or boat tent.

I am going to assume you have a decent sized truck and tent (and if you don’t have a truck or tent, you will need to build one).

If you are planning to build a boat tent, I highly recommend buying a boat trailer for $1,200.

If you plan to camp in a tent, be sure to buy a large tent with an ice machine and a large fire pit.

Here are the parts you will use to build these things.

The ice machine: Ice machine (a wooden rod that you can purchase for about $15 or more).

It is not necessary but it can be handy for setting up a tent or trailer if you want to do a lot of work with a single ice machine.

The fire pit: A wood pan that you buy for about half the price of the ice machine ($15 or less).

You can build a fire pit for about the same price ($15-20).

A few things to remember: You need to have a sturdy ice machine with a solid base to work with.

If it doesn’t have the sturdy base, the ice will not work.

A wooden rod or the top of a truck can be used as a base for building a tent.

The tent: A sturdy tent that will be used for a lot more work than a wooden rod will allow.

The stakes: A pair of small wooden stakes ($1 or more) that you need to attach to the ice.

You will need two of them for the tent.

If the stakes are small, you can attach them to the base of the tent by tying them to two large, thin rope.

It is also worth noting that some tent stakes have a small hook on them.

You can tie a pair of hooks to your stakes and tie them to a piece of string.

If this doesn’t work, you may want to buy some large, long-handled hooks to attach them.

The metal hooks: A metal hook ($5-10) that will attach to a tent pole.

You don’t need a tent hook, just a long, thin metal rod with a metal head.

You need a long hook to attach the tent pole to the tent so that the pole stays stable.

You also need to make sure that the tent poles are firmly attached to the ground.

You’ll need to purchase a set of stakes ($5 or more), a long rope ($20-30), and a heavy, sharp knife.

You should buy a few stakes for the pole to keep it stable.

A knife with a small blade ($5) is also a good choice.

The rope: You will want a large, thick, heavy rope to attach your tent pole, tent poles, and other parts of your tent to.

You could also buy a rope to tie to a log.

If your tent poles do not have a handle, you could also make your own handle from some pieces of plywood.

It does not take much to make a large wooden handle.

Here is a video showing you how to build the tent tent and building the ice fishing pole.

Once you have all the necessary items, it is time to start building your tent tent.

You only need two pieces of wood, one piece of rope, and a small piece of metal to make your tent.

Here’s how to make the tent and tent pole: 1.

Cut two pieces at least 12 inches (30 cm) long of solid wood.

You may need to cut the wood thinner if it is a bit thicker.

For this tent, the lengths are about 18 inches (45 cm).

For this pole, the length is about 24 inches (61 cm).

2.

Drill holes for the stakes.

Make sure the stakes sit flush with the ground and are straight.

3.

Cut a piece about 2 inches (5 cm) wide and 4 inches (10 cm) tall.

For a trailer, you’ll need about two inches (50 cm) of wood for the first piece of wood and about a foot of rope for the second piece of material.

The final piece of lumber will need a bit more material than for a tent tent because the tent will have a tent post.

4.

Drill four holes into each piece of the lumber.

These holes will help hold the pieces together.

5.

Take one of the two pieces that you cut and cut the lengths of wood in half.

This will make four longer pieces of lumber.

You might need to drill a little bit of extra material into each of the pieces.

6.

Cut the pieces of rope that are 1.5 inches (4 cm) longer than the length of the longer piece.

The length of each of these is about two feet (60 cm).

You might also want to cut more than two feet of rope.

7.

Cut about two pieces (6 inches) of metal from an old piece of plyboard that you already had in your garage.

8.

Drill two holes into the sides of